VISUAL INSPECTIONS SYSTEMS

Visual Inspection System quickly and accurately inspects mounting boards that evolve day by day, and judge whether they pass or fail inspection without exception

VISUAL INSPECTIONS SYSTEMS

Visual Inspection System quickly and accurately inspects mounting boards that evolve day by day, and judge whether they pass or fail inspection without exception

IN-CIRCUIT TEST SYSTEMS

Inspection Pro Series IP-5000 is a compact, high-speed board In-Circuit Tester designed to save space.

IN-CIRCUIT TEST SYSTEMS

Inspection Pro Series IP-5000 is a compact, high-speed board In-Circuit Tester designed to save space.

DIGITAL TEST

Our Eagle at 5500 N can be equipped with up to 3456 analog and hybrid in-circuit test pins

DIGITAL TEST

MTS 505 flying probe tester requires no fixture and is therefore ideal not only for traditional production, but also for prototyping and low-volume production.

PROBE EXTRACTION & INSERTION TOOLS

Our new Probe Extraction tool can pull out a pin without widening its hole diameter or damaging next pins

Cleaning Mat

E.Q.O mat is cleaner that removes the contamination such as flux and oxide films stuck to the tip of the test probe easily and quickly

FUNCTION TEST

Some quick example text to build on the card title and make up the bulk of the card's content.

SOFTWARE

C-LINK DTM takes all major CAD systems and automates the translation of design data to any test in-spection system

SOFTWARE

CITE 8 is the current software for all our test systems – so that you can generate test programs quickly and simply

JTAG2 EN JTAG2 EN JTAG2 EN JTAG2 EN

JTAG2 EN JTAG2 EN JTAG2 EN JTAG2 EN JTAG2 EN JTAG2 EN JTAG2 EN JTAG2 EN

HIGH CURRENT PROBES

Standard HSS are unrivalled HSS probes with an optimal ratio of rated current load of 20 to 100 Amps in a compact design. Both press-in versions and screw-in versions are available.

HIGH CURRENT PROBES

Short-stroke HSS and long-stroke HSS are used in applications where limited test space is available, or contacting which requires a long stroke (e.g. dual-stage contacting). International standard

HIGH CURRENT PROBES

Dipole high current probes (Kelvin probes) four-wire measurements can be performed directly on the contact surface.

ICT / FCT PROBES

International standard spring-loaded test probes (GKS) (inch) Available in two different versions: Standard working stroke (4.3 mm) and longer working stroke (9.3 mm) for dual- stage test fixtures to

ICT / FCT PROBES

INGUN E-TYPE® test probes have a higher preload in comparison to standard test probes. This initial higher spring force guarantees a secure contact at the same final load (the spring force is equal to

ICT / FCT PROBES

Bead test probes are used to contact beads on PCBs. A variety of tip styles are available depending on the beads.

ICT / FCT PROBES

Fine pitch test probes are used to contact very small test points in small grids. These are sometimes mounted without receptacles.

ICT / FCT PROBES

Metric test probes (metric standard) In addition to the classic ICT/FCT test probes without collars, the metric standard test probes stand out due to their stability and robustness and all feature a p

SWITCHING PROBES

Press-in and screw-in versions are available, depending on installation requirements. These are also available as quick-exchange systems in most series. Screw-in versions are especially suitable for a

SCREW-IN TEST PROBES

Screw-in test probes are often used to contact cable harnesses and plug connectors. They remain securely positioned in the receptacle even under challenging test conditions with vibrations or axial fo

SCREW-IN TEST PROBES

Screw-in test probes are often used to contact cable harnesses and plug connectors. They remain securely positioned in the receptacle even under challenging test conditions with vibrations or axial fo

DIPOLE TEST PROBES AND RF TEST PROBES

Dipole test probes and RF test probes are used in various industries: They enable precise, accurately repeatable measurement of resistance as well as RF performance.

PNEUMATIC TEST PROBES

Pneumatic test probes (PKS) are used in all industries and a multitude of applications. These include individual contacting of single test points, activation of switches, contacting of difficult-to-ac

ASSORTED TEST PROBES

Spring-loaded test probes can be used directly in assemblies or on PC boards in addition to classic test purposes. Therefore, INGUN probes can be used for a wide variety of test applications.

ACCESSORIES TEST PROBE/TEST FIXTURE

In addition to the classic range of test probes for the testing of PC boards and components, further test probes are available as test accessories:

Insertion and Extraction Tools

INGUN tools make an important contribution to secure, precise testing. Only with optimally installed receptacles and test probes, can reliable testing be guaranteed. Depending on the receptacle a

Sparrow MTS 30

19 inch In-Circuit Test System The Sparrow offers maximum flexibility and test capability in a small footprint. Up to 1,152 pins Fast Access Interface (FAI) – quick exchange interface for easy mainten

MMBX / MMCX / MMPX / MBX / MCX

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M HFS-822 HFS-860 / 860 M HFS-865

SMB / SMC

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M

SMP / SMP-L / SSMP / SMP-MAX / P-SMP / SMPX

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M HFS-822 HFS-856 HFS-860 / 860 M HFS-865

SMA / PC 3.5 / QMA

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M HFS-860 / 860 M HFS-865 / 822

BMA / BNC / 1.0/2.3

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M HFS-860 / 860 M HFS-865 / 822

N / FME / 7/16

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M HFS-860 / 860 M HFS-864

U.FL / W.FL / W.FL2 / X.FL / MM5829

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M HFS-822 HFS-852

R-SMA / R-TNC Reverse Polarity

HFS-810 / 810 M HFS-840 / 840 M HFS-410 / 410 M HFS-440 / 440 M HFS-860 / 860 M

IEC, F

HFS-409

FAKRA, GT13, GT16

HFS-810/810 M/810 4M HFS-840/840 M/840 4M HFS-410/410 M/410 4M HFS-440/440 M/440 4M

IP-7000 series

WIT, have local branch in Japan, China, Thailand and Vietnam to closely support our customers in the development, production and maintenance of their testing needs. Our functional testers are used in

Mileva Sensor

An Ultra-Miniature/Compact/ Camera only 8mm in diameter with built in LED lighting, able to fit in small places and can also be used in connections with electrical test providing video inspection duri

INGUN ICT/FCT Test Probes

The in-circuit test (ICT) involves the measurement of all individual components of an assembly. Defective components are detected and can be replaced if necessary. The function test (FCT) checks an as

INGUN High Frequency Test Probes

Radio frequency (HFS) and dipole test probes are used in a wide range of industries. They enable precise and replicable measurement of RF performance and contact resistance. High measurement accuracy,

FlashRunner 2.0

FlashRunner 2.0 – the most advanced hardware and software technology, that make FR 2.0 the most performing in-system programmer in the market

FlashRunner 2.0 NXG

FlashRunner 2.0 NXG

FlashRunner HS

FlashRunner HS

AIP-4000